Circle Track KitsHomePageFind a Dealer!

Our “PRO SERIES” KITS cover all forms of circle track and give the racer some choices for mounting locations, including the front of the engine, or off either the quick change or Ford 9” rear end. All kits come with a true one wire alternator, alternator pulley, and preassembled bracket. The front mount kit also includes a pulley for easy bolting to the front of the water pump pulley and belt. The quick change and Ford 9” 3rd member kits require a customer supplied yoke pulley.

High Mount
Racing Alternator Kit

  • Designed for Circle Track Applications
  • Mounts to SBC Water Pump Bolts
  • Complete w/70 AMP Alternator, 3              groove serpentine belt and pulleys

    • 8-802-SBC

    Engine Mount Kit

    8-801

    This kit will attach to either side of the motor via the two bolts attaching the water pump. A V-belt pulley is supplied that is mounted to the front of the water pump pulley. In most cases, this drive system will not interfere with any existing setup.

    Note: This kit can also be mounted backwards - driving off the water pump - if the spacers are changed and a different belt size is used.

    Alternator Part

    # 8162

    Alt./Water Pump Pulley

    # 171

    Bracket Part

    # 801

    Belt Part

    # 7240

    100 Amp High Mount Kit

    Alternator Part

    # 8062

    Alt/Water Pump Pulley

    # 170

    Bracket Part

    # 722

    Belt Part

    # 3PK0610

    8-722

    This kit mounts the alternator to the passenger side cylinder head area and drives off the front of the water pump with a serpentine pulley system. This setup does not interfere with other belt drive systems already in use. The alternator produces 60 amps at low RPMs and 100 amps at racing speed.

    Also Available:
    Bracket Part # 723
    For use on engines that do not have three threaded holes in the heads.

    Quick Change Kit

    Fits Winters & Richmond Rear Ends

    8-400

    This kit is great for asphalt racers when the rules allow driving an alternator off the 3rd member. The mounting block is very versatile, allowing for mounting on either side of the center section.

    Note: A customer supplied yoke pulley is required (Sweet Part # 501-30027).

    Alternator Part

    # 8162

    Alt. Pulley

    # 181

    Bracket Part

    # 400

    Ford 9” Third Member Kit

    8-410

    This kit is great for asphalt racers when the rules allow driving an alternator off the 3rd member.

    Note: A customer supplied yoke pulley is required

    Alternator Part

    # 8162

    Alt. Pulley

    # 181

    Bracket Part

    # 410

    Home Late Model Hot Rod Truck Racing Harley Accessories XS Power High Amp Starters Whats New! Tech Help Contact Us Jobs Multimedia Events News
    site last updated 8.31.07

    PH: 865-688-5953

    © 2006 Powermaster Motorsports. All rights reserved.